Binder jet 3D printer

Häme Universtity of Applied Sciences Ltd (HAMK) is asking quotations for a binder jet 3D printer. The printer is used for research activities in the HAMK Tech and HAMK Bio research units, and also supports HAMK's educational activities. The equipment is used for 3D printing of various materials (e.g., metals, …

CPV: 42000000 Máquinas industriais
Prazo:
25 de Abril de 2025 às 13:00
Tipo de prazo:
Submissão da oferta
Local de execução:
Binder jet 3D printer
Local de premiação:
Häme University of Applied Sciences Ltd
Número do prémio:
553524

1. Buyer

1.1 Buyer

Official name : Häme University of Applied Sciences Ltd
Legal type of the buyer : Body governed by public law
Activity of the contracting authority : Education

2. Procedure

2.1 Procedure

Title : Binder jet 3D printer
Description : Häme Universtity of Applied Sciences Ltd (HAMK) is asking quotations for a binder jet 3D printer. The printer is used for research activities in the HAMK Tech and HAMK Bio research units, and also supports HAMK's educational activities. The equipment is used for 3D printing of various materials (e.g., metals, ceramics, bio-based materials) using binder jetting technology. For technical and other minimum requirements, see annex 1 of this call for tenders.
Procedure identifier : 340300e5-46bb-4032-ba3f-f6cbe753f287
Internal identifier : 553524
Type of procedure : Open
The procedure is accelerated : no
Justification for the accelerated procedure :
Main features of the procedure : The procurement procedure is an open procedure in accordance with the Finnish Act on Public contracts and concessions (1397/2016) and the EU directive 2014/24/EU on public procurements.

2.1.1 Purpose

Main nature of the contract : Supplies
Main classification ( cpv ): 42000000 Industrial machinery

2.1.2 Place of performance

Town : Riihimäki
Country subdivision (NUTS) : Kanta-Häme ( FI1C2 )
Country : Finland

2.1.4 General information

Legal basis :
Directive 2014/24/EU

2.1.6 Grounds for exclusion

Analogous situation like bankruptcy under national law : The economic operator is in any analogous situation like bankruptcy arising from a similar procedure under national laws and regulations.
Bankruptcy : The economic operator is bankrupt.
Corruption : The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for corruption, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
Arrangement with creditors : The economic operator is in arrangement with creditors.
Participation in a criminal organisation : The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for participation in a criminal organisation, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
Agreements with other economic operators aimed at distorting competition : The economic operator has entered into agreements with other economic operators aimed at distorting competition.
Breaching of obligations in the fields of environmental law : The economic operator has breached its obligations in the field of environmental law.
Money laundering or terrorist financing : The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for money laundering or terrorist financing, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
Fraud : The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for fraud, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
Child labour and other forms of trafficking in human beings : The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for child labour and other forms of trafficking in human beings, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
Insolvency : The economic operator is the subject of insolvency or winding-up.
Breaching of obligations in the fields of labour law : The economic operator has breached its obligations in the field of labour law.
Assets being administered by liquidator : The assets of the economic operator are being administered by a liquidator or by the court.
Purely national exclusion grounds : Any person who is a member of the economic operator’s administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for work safety offence, working hours offence, work discrimination, extortionate work discrimination, violation of the right to organise or unauthorised use of foreign labour.
Conflict of interest due to its participation in the procurement procedure : The economic operator is aware of any conflict of interest, as indicated in national law, the relevant notice or the procurement documents due to its participation in the procurement procedure.
Direct or indirect involvement in the preparation of this procurement procedure : The economic operator or an undertaking related to it has advised the contracting authority or contracting entity or otherwise been involved in the preparation of the procurement procedure.
Guilty of grave professional misconduct : The economic operator is guilty of grave professional misconduct.
Early termination, damages or other comparable sanctions : The economic operator has experienced that a prior public contract, a prior contract with a contracting entity or a prior concession contract was terminated early, or that damages or other comparable sanctions were imposed in connection with that prior contract.
Breaching of obligations in the fields of social law : The economic operator has breached its obligations in the field of social law.
Payment of social security contributions : The economic operator has breached its obligations relating to the payment social security contributions, both in the country in which it is established and in Member State of the contracting authority or contracting entity if other than the country of establishment.
Business activities are suspended : The business activities of the economic operator are suspended.
Payment of taxes : The economic operator has breached its obligations relating to the payment of taxes, both in the country in which it is established and in Member State of the contracting authority or contracting entity if other than the country of establishment.
Terrorist offences or offences linked to terrorist activities : The economic operator itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein has been the subject of a conviction by final judgment for terrorist offences or offences linked to terrorist activities, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.

5. Lot

5.1 Lot technical ID : LOT-0000

Title : Binder jet 3D printer
Description : Häme Universtity of Applied Sciences Ltd (HAMK) is asking quotations for a binder jet 3D printer. The printer is used for research activities in the HAMK Tech and HAMK Bio research units, and also supports HAMK's educational activities. The equipment is used for 3D printing of various materials (e.g., metals, ceramics, bio-based materials) using binder jetting technology. For technical and other minimum requirements, see annex 1 of this call for tenders.
Internal identifier : 553524

5.1.1 Purpose

Main nature of the contract : Supplies
Main classification ( cpv ): 42000000 Industrial machinery

5.1.2 Place of performance

Town : Riihimäki
Country subdivision (NUTS) : Kanta-Häme ( FI1C2 )
Country : Finland
Additional information :

5.1.3 Estimated duration

Other duration : Unknown

5.1.6 General information

Reserved participation : Participation is not reserved.
Procurement Project fully or partially financed with EU Funds.
The procurement is covered by the Government Procurement Agreement (GPA) : yes
This procurement is also suitable for small and medium-sized enterprises (SMEs) : no

5.1.7 Strategic procurement

Approach to reducing environmental impacts : The transition to a circular economy

5.1.9 Selection criteria

Criterion :
Type : Economic and financial standing
Use of this criterion : Not used
Criterion :
Type : Other
Name : Country of establishment
Description : The contracting entity accepts tenders only from tenderers who fulfill one of the following criteria: 1) the tenderer's country of establishment is inside the EU. 2) the tenderer's country of establishment is a party of WTO’s Agreement on Government Procurement (GPA). The GPA must cover the goods specified in this call for tenders. 3) the tenderer's country of establishment has a bilateral agreement of government procurements with the EU. The bilateral agreement must cover the goods specified in this call for tenders.
Use of this criterion : Used
Criterion :
Type : Suitability to pursue the professional activity
Name : Enrolment in a trade register
Description : The tenderer is enrolled in the relevant trade registers kept in the Member State of its establishment: It is enrolled in relevant professional registers kept in the Member State of its establishment as described in Annex XI of Directive 2014/24/EU; economic operators from certain Member States may have to comply with other requirements set out in that Annex.
Use of this criterion : Used
Criterion :
Type : Technical and professional ability
Name : References
Description : The tenderer must have delivered at least three equal or comparable 3D printers to universities or research organisations. In this case equal and comparable means a 3D printer which fulfills all the minimum requirements stated in this call for tenders and its annexes.
Use of this criterion : Used

5.1.10 Award criteria

Criterion :
Type : Price
Name : Total price
Description : The selection criterion for the procurement is the total price. The offer with the lowest total price will be chosen as the winner of the competition. In the event that multiple tenderers have submitted the same lowest price, the winner of the tender will be determined by means of a draw conducted among those who submitted the lowest bid.
Category of award threshold criterion : Weight (percentage, exact)
Award criterion number : 100
Description of the method to be used if weighting cannot be expressed by criteria :
Justification for not indicating the weighting of the award criteria :

5.1.11 Procurement documents

Languages in which the procurement documents are officially available : English
Deadline for requesting additional information : 16/04/2025 13:00 +00:00

5.1.12 Terms of procurement

Terms of submission :
Electronic submission : Required
Languages in which tenders or requests to participate may be submitted : English, Finnish
Electronic catalogue : Not allowed
Variants : Not allowed
Tenderers may submit more than one tender : Not allowed
Deadline for receipt of tenders : 25/04/2025 13:00 +00:00
Deadline until which the tender must remain valid : 2 Month
Information about public opening :
Opening date : 28/04/2025 06:00 +00:00
Terms of contract :
The execution of the contract must be performed within the framework of sheltered employment programmes : No
A non-disclosure agreement is required : no
Electronic invoicing : Allowed
Electronic ordering will be used : yes
Electronic payment will be used : yes

5.1.15 Techniques

Framework agreement :
No framework agreement
Information about the dynamic purchasing system :
No dynamic purchase system

5.1.16 Further information, mediation and review

Review organisation : Markkinaoikeus -
Organisation providing additional information about the procurement procedure : Häme University of Applied Sciences Ltd -
Organisation providing offline access to the procurement documents : Häme University of Applied Sciences Ltd -

8. Organisations

8.1 ORG-0001

Official name : Häme University of Applied Sciences Ltd
Registration number : 2617489-3
Postal address : Visamäentie 35 A
Town : Hämeenlinna
Postcode : 13100
Country subdivision (NUTS) : Kanta-Häme ( FI1C2 )
Country : Finland
Contact point : Toni Pulliainen
Telephone : +358 505764221
Internet address : http://www.hamk.fi
Roles of this organisation :
Buyer
Organisation providing additional information about the procurement procedure
Organisation providing offline access to the procurement documents

8.1 ORG-0002

Official name : Markkinaoikeus
Registration number : 3006157-6
Postal address : Radanrakentajantie 5
Town : Helsinki
Postcode : 00520
Country subdivision (NUTS) : Helsinki-Uusimaa ( FI1B1 )
Country : Finland
Telephone : +358 295643300
Roles of this organisation :
Review organisation

8.1 ORG-0003

Official name : Hansel Oy (Hilma)
Registration number : FI09880841
Postal address : Mannerheiminaukio 1a
Town : Helsinki
Postcode : 00100
Country subdivision (NUTS) : Helsinki-Uusimaa ( FI1B1 )
Country : Finland
Contact point : eSender
Telephone : 029 55 636 30
Roles of this organisation :
TED eSender
Notice information
Notice identifier/version : b35a2456-a15a-4f53-ad6c-08dbab19920c - 01
Form type : Competition
Notice type : Contract or concession notice – standard regime
Notice dispatch date : 26/03/2025 11:51 +00:00
Notice dispatch date (eSender) : 26/03/2025 11:59 +00:00
Languages in which this notice is officially available : English
Notice publication number : 00196604-2025
OJ S issue number : 61/2025
Publication date : 27/03/2025